Control of a Z-axis MEMS vibrational gyroscope

Roberto Oboe, Riccardo Antonello, Ernesto Lasalandra, Guido Spinola, Luciano Prandi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The paper describes the design of the control loops in a Z-axis, MEMS vibrational gyroscope. In this device, a silicon mass is driven through electrostatic actuator so that it has a sinusoidal linear motion, with a controlled speed. The design of a suitable controller, capable of maintaining the required speed and with prescribed restoring capabilities after shocks has been derived and described in the paper. Attached to the driving mass, a second mass, free to move in the direction orthogonal to the motion of the first mass, is subjected to a Coriolis force, proportional to the product of the first mass speed by Z-axis rotational speed. The sensing of the Coriolis force and, in turn, of the Z-axis rotational speed, is performed in closed loop fashion, with a 1-bit quantized actuation. The restoring force that brings the motion of the second mass to zero is equivalent to the output bit stream of a sigma-delta converter and contains the information of the Coriolis force. The design of this second control loop and a detailed analysis on the signal-to-noise ratio achievable with the proposed design is reported.

Original languageEnglish
Title of host publicationInternational Workshop on Advanced Motion Control, AMC
Pages153-158
Number of pages6
Publication statusPublished - 2004
EventProceedings - 8th IEEE International Workshop on Advanced Motion Control, AMC'04 - Kawasaki, Japan
Duration: Mar 25 2004Mar 28 2004

Other

OtherProceedings - 8th IEEE International Workshop on Advanced Motion Control, AMC'04
CountryJapan
CityKawasaki
Period3/25/043/28/04

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Control of a Z-axis MEMS vibrational gyroscope'. Together they form a unique fingerprint.

  • Cite this

    Oboe, R., Antonello, R., Lasalandra, E., Spinola, G., & Prandi, L. (2004). Control of a Z-axis MEMS vibrational gyroscope. In International Workshop on Advanced Motion Control, AMC (pp. 153-158)