Gestione ortodontica dell'agenesia degli incisivi laterali mascellari tramite dispositivo distalizzante ad ancoraggio scheletrico

Translated title of the contribution: Orthodontic management of missing lateral incisor by miniscrew-anchored device

Marco Portelli, Angela Militi, Riccardo Nucera, Marco Cicciù, Enrico Gherlone, Alessandra Lucchese

Research output: Contribution to journalArticle

Abstract

Congenitally missing teeth are one of the most common tooth anomalies associated to therapeutic sets of problems. Orthodontists should consider these clinical cases because management often requires an integrated orthodontic and restorative approach. In the present study authors reported a therapy note referred to a 14-year-old male patient affected by missing maxillary lateral incisors, bilateral dental Class II and deep bite, treated in 2009 at the Department of Orthodontics of the University of Messina. An orthodontic treatment has been planned with the aim of distalize maxillary molar and the following opening of the spaces necessary for the prosthetic restoration of missing lateral incisor. For the distalization of maxillary molars has been decided to use a Distal Jet supported by miniscrew (Distal-Screw, American Orthodontics, Sheboygan, WI, USA). After seven months of treatment with distal screw, maxillary molar distalization was completed, obtaining a bilateral molar Class I. A multi-bracket orthodontic appliance was bonded in the upper and lower arch using Empower Brackets (American Orthodontics). Class II molar relationship has been over-corrected to Class I in about seven months. The orientation of the force vector resulted in a tipping and rotation of the first molars, without significant vertical changes. Distal Jet reinforced with screws seems to be effective in molar distalization without any type of side effects. The advantages of this device were the absence of patient compliance, relatively predictable outcomes, favorable esthetics, possibility of different activations in each side.

Original languageItalian
Pages (from-to)403-411
Number of pages9
JournalMinerva Stomatologica
Volume65
Issue number6
Publication statusPublished - Dec 1 2016

Fingerprint

Incisor
Orthodontics
Equipment and Supplies
Tooth
Orthodontic Brackets
Orthodontic Appliances
Overbite
Case Management
Therapeutics
Patient Compliance
Esthetics

ASJC Scopus subject areas

  • Surgery
  • Oral Surgery
  • Otorhinolaryngology

Cite this

Gestione ortodontica dell'agenesia degli incisivi laterali mascellari tramite dispositivo distalizzante ad ancoraggio scheletrico. / Portelli, Marco; Militi, Angela; Nucera, Riccardo; Cicciù, Marco; Gherlone, Enrico; Lucchese, Alessandra.

In: Minerva Stomatologica, Vol. 65, No. 6, 01.12.2016, p. 403-411.

Research output: Contribution to journalArticle

@article{73089c9c1e0c44b7b58a217ac05b7dee,
title = "Gestione ortodontica dell'agenesia degli incisivi laterali mascellari tramite dispositivo distalizzante ad ancoraggio scheletrico",
abstract = "Congenitally missing teeth are one of the most common tooth anomalies associated to therapeutic sets of problems. Orthodontists should consider these clinical cases because management often requires an integrated orthodontic and restorative approach. In the present study authors reported a therapy note referred to a 14-year-old male patient affected by missing maxillary lateral incisors, bilateral dental Class II and deep bite, treated in 2009 at the Department of Orthodontics of the University of Messina. An orthodontic treatment has been planned with the aim of distalize maxillary molar and the following opening of the spaces necessary for the prosthetic restoration of missing lateral incisor. For the distalization of maxillary molars has been decided to use a Distal Jet supported by miniscrew (Distal-Screw, American Orthodontics, Sheboygan, WI, USA). After seven months of treatment with distal screw, maxillary molar distalization was completed, obtaining a bilateral molar Class I. A multi-bracket orthodontic appliance was bonded in the upper and lower arch using Empower Brackets (American Orthodontics). Class II molar relationship has been over-corrected to Class I in about seven months. The orientation of the force vector resulted in a tipping and rotation of the first molars, without significant vertical changes. Distal Jet reinforced with screws seems to be effective in molar distalization without any type of side effects. The advantages of this device were the absence of patient compliance, relatively predictable outcomes, favorable esthetics, possibility of different activations in each side.",
keywords = "Dental implants, Orthodontic anchorage procedures, Orthodontic brackets, Selective tooth agenesis",
author = "Marco Portelli and Angela Militi and Riccardo Nucera and Marco Cicci{\`u} and Enrico Gherlone and Alessandra Lucchese",
year = "2016",
month = "12",
day = "1",
language = "Italian",
volume = "65",
pages = "403--411",
journal = "Minerva Stomatologica",
issn = "0926-4970",
publisher = "Edizioni Minerva Medica S.p.A.",
number = "6",

}

TY - JOUR

T1 - Gestione ortodontica dell'agenesia degli incisivi laterali mascellari tramite dispositivo distalizzante ad ancoraggio scheletrico

AU - Portelli, Marco

AU - Militi, Angela

AU - Nucera, Riccardo

AU - Cicciù, Marco

AU - Gherlone, Enrico

AU - Lucchese, Alessandra

PY - 2016/12/1

Y1 - 2016/12/1

N2 - Congenitally missing teeth are one of the most common tooth anomalies associated to therapeutic sets of problems. Orthodontists should consider these clinical cases because management often requires an integrated orthodontic and restorative approach. In the present study authors reported a therapy note referred to a 14-year-old male patient affected by missing maxillary lateral incisors, bilateral dental Class II and deep bite, treated in 2009 at the Department of Orthodontics of the University of Messina. An orthodontic treatment has been planned with the aim of distalize maxillary molar and the following opening of the spaces necessary for the prosthetic restoration of missing lateral incisor. For the distalization of maxillary molars has been decided to use a Distal Jet supported by miniscrew (Distal-Screw, American Orthodontics, Sheboygan, WI, USA). After seven months of treatment with distal screw, maxillary molar distalization was completed, obtaining a bilateral molar Class I. A multi-bracket orthodontic appliance was bonded in the upper and lower arch using Empower Brackets (American Orthodontics). Class II molar relationship has been over-corrected to Class I in about seven months. The orientation of the force vector resulted in a tipping and rotation of the first molars, without significant vertical changes. Distal Jet reinforced with screws seems to be effective in molar distalization without any type of side effects. The advantages of this device were the absence of patient compliance, relatively predictable outcomes, favorable esthetics, possibility of different activations in each side.

AB - Congenitally missing teeth are one of the most common tooth anomalies associated to therapeutic sets of problems. Orthodontists should consider these clinical cases because management often requires an integrated orthodontic and restorative approach. In the present study authors reported a therapy note referred to a 14-year-old male patient affected by missing maxillary lateral incisors, bilateral dental Class II and deep bite, treated in 2009 at the Department of Orthodontics of the University of Messina. An orthodontic treatment has been planned with the aim of distalize maxillary molar and the following opening of the spaces necessary for the prosthetic restoration of missing lateral incisor. For the distalization of maxillary molars has been decided to use a Distal Jet supported by miniscrew (Distal-Screw, American Orthodontics, Sheboygan, WI, USA). After seven months of treatment with distal screw, maxillary molar distalization was completed, obtaining a bilateral molar Class I. A multi-bracket orthodontic appliance was bonded in the upper and lower arch using Empower Brackets (American Orthodontics). Class II molar relationship has been over-corrected to Class I in about seven months. The orientation of the force vector resulted in a tipping and rotation of the first molars, without significant vertical changes. Distal Jet reinforced with screws seems to be effective in molar distalization without any type of side effects. The advantages of this device were the absence of patient compliance, relatively predictable outcomes, favorable esthetics, possibility of different activations in each side.

KW - Dental implants

KW - Orthodontic anchorage procedures

KW - Orthodontic brackets

KW - Selective tooth agenesis

UR - http://www.scopus.com/inward/record.url?scp=84990946854&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84990946854&partnerID=8YFLogxK

M3 - Articolo

VL - 65

SP - 403

EP - 411

JO - Minerva Stomatologica

JF - Minerva Stomatologica

SN - 0926-4970

IS - 6

ER -