The statics of cervical traction

A. Pio, M. Rendina, F. Benazzo, C. Castelli, F. Paparella

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

The statics of a sliding body was used to study the distribution of forces during the application of cervical traction in supine patients. This theoretical analysis was completed using a dynamometer to determine the static friction between bed surface and patient head. Therefore, we measured the head weight in 12 inpatients and the minimum force that causes impending motion of the head on the bed surface. The static friction coefficient was calculated from the ratio of the two quantities. The forces acting on the cervical spine were determined by inserting the former data into a specifically designed algorithm that forecasted a progressively increasing traction angle. The coefficient of static friction was 0.62, whereas the maximum available force acting on the cervical spine was obtained with a 35° traction inclination. In contrast, the forces dissipated by the plane progressively decreased with larger angles.

Original languageEnglish
Pages (from-to)337-342
Number of pages6
JournalJournal of Strength and Conditioning Research
Volume8
Issue number3
Publication statusPublished - 1994

Fingerprint

Friction
Traction
Head
Spine
Inpatients
Weights and Measures

Keywords

  • Cervical traction
  • Statics

ASJC Scopus subject areas

  • Orthopedics and Sports Medicine
  • Physical Therapy, Sports Therapy and Rehabilitation

Cite this

The statics of cervical traction. / Pio, A.; Rendina, M.; Benazzo, F.; Castelli, C.; Paparella, F.

In: Journal of Strength and Conditioning Research, Vol. 8, No. 3, 1994, p. 337-342.

Research output: Contribution to journalArticle

@article{5e2565df477e43ceb6469ed44ca0f217,
title = "The statics of cervical traction",
abstract = "The statics of a sliding body was used to study the distribution of forces during the application of cervical traction in supine patients. This theoretical analysis was completed using a dynamometer to determine the static friction between bed surface and patient head. Therefore, we measured the head weight in 12 inpatients and the minimum force that causes impending motion of the head on the bed surface. The static friction coefficient was calculated from the ratio of the two quantities. The forces acting on the cervical spine were determined by inserting the former data into a specifically designed algorithm that forecasted a progressively increasing traction angle. The coefficient of static friction was 0.62, whereas the maximum available force acting on the cervical spine was obtained with a 35° traction inclination. In contrast, the forces dissipated by the plane progressively decreased with larger angles.",
keywords = "Cervical traction, Statics",
author = "A. Pio and M. Rendina and F. Benazzo and C. Castelli and F. Paparella",
year = "1994",
language = "English",
volume = "8",
pages = "337--342",
journal = "Journal of Strength and Conditioning Research",
issn = "1064-8011",
publisher = "NSCA National Strength and Conditioning Association",
number = "3",

}

TY - JOUR

T1 - The statics of cervical traction

AU - Pio, A.

AU - Rendina, M.

AU - Benazzo, F.

AU - Castelli, C.

AU - Paparella, F.

PY - 1994

Y1 - 1994

N2 - The statics of a sliding body was used to study the distribution of forces during the application of cervical traction in supine patients. This theoretical analysis was completed using a dynamometer to determine the static friction between bed surface and patient head. Therefore, we measured the head weight in 12 inpatients and the minimum force that causes impending motion of the head on the bed surface. The static friction coefficient was calculated from the ratio of the two quantities. The forces acting on the cervical spine were determined by inserting the former data into a specifically designed algorithm that forecasted a progressively increasing traction angle. The coefficient of static friction was 0.62, whereas the maximum available force acting on the cervical spine was obtained with a 35° traction inclination. In contrast, the forces dissipated by the plane progressively decreased with larger angles.

AB - The statics of a sliding body was used to study the distribution of forces during the application of cervical traction in supine patients. This theoretical analysis was completed using a dynamometer to determine the static friction between bed surface and patient head. Therefore, we measured the head weight in 12 inpatients and the minimum force that causes impending motion of the head on the bed surface. The static friction coefficient was calculated from the ratio of the two quantities. The forces acting on the cervical spine were determined by inserting the former data into a specifically designed algorithm that forecasted a progressively increasing traction angle. The coefficient of static friction was 0.62, whereas the maximum available force acting on the cervical spine was obtained with a 35° traction inclination. In contrast, the forces dissipated by the plane progressively decreased with larger angles.

KW - Cervical traction

KW - Statics

UR - http://www.scopus.com/inward/record.url?scp=84937095883&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937095883&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84937095883

VL - 8

SP - 337

EP - 342

JO - Journal of Strength and Conditioning Research

JF - Journal of Strength and Conditioning Research

SN - 1064-8011

IS - 3

ER -